Twine 1.10.0rc1 on Test PyPI

[Sumana Harihareswara]

(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)

https://test.pypi.org/manage/project/twine/release/1.10.0rc1/

This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.

This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.

Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".

I believe this is how you test it out:

pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine

Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

[Sumana Harihareswara]

Wrong URL (did I mention I'm new at this?). View 1.10.0rc1, including a
fairly spiffy new README, at:
https://test.pypi.org/project/twine/1.10.0rc1/ -- and please pass word
along to our downstreams.

-Sumana

Post by Sumana Harihareswara
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)
https://test.pypi.org/manage/project/twine/release/1.10.0rc1/
This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.
This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.
Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".
pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine
Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

[Jason R. Coombs]

Thanks for working on this!

In my particular use-case, I rarely run twine myself, but instead rely on the Travis-CI DPL routine<https://github.com/travis-ci/dpl/blob/master/lib/dpl/provider/pypi.rb>. Looking at that code, I don’t see any means I have to test a pre-release version.

Given the presumably broad impact this one use-case has, it would be nice if there were a way to test it against pre-release versions of twine (and maybe also wheel, pip, and setuptools). Perhaps it would be worthwhile to propose a hook to that project to enable the versions of those projects to be specified for selective testing.

Oh, I just had an idea - perhaps one could set the PIP_PRE environment variable and that would affect the install and allow the pre-release to be tested. I’ll give that a go.

On 3 Mar, 2018, at 11:06, Sumana Harihareswara <***@changeset.nyc<mailto:***@changeset.nyc>> wrote:

Wrong URL (did I mention I'm new at this?). View 1.10.0rc1, including a
fairly spiffy new README, at:
https://test.pypi.org/project/twine/1.10.0rc1/ -- and please pass word
along to our downstreams.

-Sumana

On 03/02/2018 05:32 PM, Sumana Harihareswara wrote:
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)

https://test.pypi.org/manage/project/twine/release/1.10.0rc1/

This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.

This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.

Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".

I believe this is how you test it out:

pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine

Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

[Jason R. Coombs]

I tried but as you can see in this job<https://travis-ci.org/yougov/paradocx/jobs/348705862>, the environment variables aren’t honored, so it seems I cannot test a twine release in Travis. At this point, I think I’ll just wait for the official release.

On 3 Mar, 2018, at 11:17, Jason R. Coombs <***@jaraco.com<mailto:***@jaraco.com>> wrote:


This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing<http://aka.ms/LearnAboutSpoofing>
Feedback<http://aka.ms/SafetyTipsFeedback>
Thanks for working on this!

In my particular use-case, I rarely run twine myself, but instead rely on the Travis-CI DPL routine<https://github.com/travis-ci/dpl/blob/master/lib/dpl/provider/pypi.rb>. Looking at that code, I don’t see any means I have to test a pre-release version.

Given the presumably broad impact this one use-case has, it would be nice if there were a way to test it against pre-release versions of twine (and maybe also wheel, pip, and setuptools). Perhaps it would be worthwhile to propose a hook to that project to enable the versions of those projects to be specified for selective testing.

Oh, I just had an idea - perhaps one could set the PIP_PRE environment variable and that would affect the install and allow the pre-release to be tested. I’ll give that a go.

On 3 Mar, 2018, at 11:06, Sumana Harihareswara <***@changeset.nyc<mailto:***@changeset.nyc>> wrote:

Wrong URL (did I mention I'm new at this?). View 1.10.0rc1, including a
fairly spiffy new README, at:
https://test.pypi.org/project/twine/1.10.0rc1/ -- and please pass word
along to our downstreams.

-Sumana

On 03/02/2018 05:32 PM, Sumana Harihareswara wrote:
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)

https://test.pypi.org/manage/project/twine/release/1.10.0rc1/

This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.

This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.

Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".

I believe this is how you test it out:

pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine

Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

[Cosimo Lupo]

Maybe you could try writing a pip configuration file in $HOME/.config/pip/pip.conf (or /etc/pip.conf). Travis dpl must be using pip to download twine, and pip should be able to look there for a `pre` option.
(I just guess, haven’t tried myself)

--


Cosimo

I tried but as you can see in this job, the environment variables aren’t honored, so it seems I cannot test a twine release in Travis. At this point, I think I’ll just wait for the official release.

This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing
Feedback
Thanks for working on this!
In my particular use-case, I rarely run twine myself, but instead rely on the Travis-CI DPL routine. Looking at that code, I don’t see any means I have to test a pre-release version.
Given the presumably broad impact this one use-case has, it would be nice if there were a way to test it against pre-release versions of twine (and maybe also wheel, pip, and setuptools). Perhaps it would be worthwhile to propose a hook to that project to enable the versions of those projects to be specified for selective testing.
Oh, I just had an idea - perhaps one could set the PIP_PRE environment variable and that would affect the install and allow the pre-release to be tested. I’ll give that a go.

Post by Sumana Harihareswara
Wrong URL (did I mention I'm new at this?). View 1.10.0rc1, including a
https://test.pypi.org/project/twine/1.10.0rc1/ -- and please pass word
along to our downstreams.
-Sumana

Post by Sumana Harihareswara
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)
https://test.pypi.org/manage/project/twine/release/1.10.0rc1/
This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.
This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.
Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".
 pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine
Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

--
Sumana Harihareswara
Changeset Consulting
https://changeset.nyc

[Sumana Harihareswara]

My current guess is that if the RC were on https://pypi.org, rather than
https://test.pypi.org, Travis would be able to grab it using PIP_PRE.
-Sumana

Post by Cosimo Lupo
Maybe you could try writing a pip configuration file in $HOME/.config/pip/pip.conf (or /etc/pip.conf). Travis dpl must be using pip to download twine, and pip should be able to look there for a `pre` option.
(I just guess, haven’t tried myself)
--
Cosimo

I tried but as you can see in this job, the environment variables aren’t honored, so it seems I cannot test a twine release in Travis. At this point, I think I’ll just wait for the official release.

This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing
Feedback
Thanks for working on this!
In my particular use-case, I rarely run twine myself, but instead rely on the Travis-CI DPL routine. Looking at that code, I don’t see any means I have to test a pre-release version.
Given the presumably broad impact this one use-case has, it would be nice if there were a way to test it against pre-release versions of twine (and maybe also wheel, pip, and setuptools). Perhaps it would be worthwhile to propose a hook to that project to enable the versions of those projects to be specified for selective testing.
Oh, I just had an idea - perhaps one could set the PIP_PRE environment variable and that would affect the install and allow the pre-release to be tested. I’ll give that a go.

Post by Sumana Harihareswara
Wrong URL (did I mention I'm new at this?). View 1.10.0rc1, including a
https://test.pypi.org/project/twine/1.10.0rc1/ -- and please pass word
along to our downstreams.
-Sumana

Post by Sumana Harihareswara
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)
https://test.pypi.org/manage/project/twine/release/1.10.0rc1/
This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.
This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.
Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".
 pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine
Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!

--
Sumana Harihareswara
Changeset Consulting
https://changeset.nyc

[Sumana Harihareswara]

https://pypi.org/project/twine/1.10.0/ Twine 1.10.0 is now out; thanks
to Jason R. Coombs, Maurits van Rees, Matthew Planchard, Holger Krekel,
Ian Stapleton Cordasco, Donald Stufft, Dustin Ingram, Pradyun Gedam,
Leonard Richardson, Jason Owen, and Nick Coghlan for advice, testing,
review, and other help.

Please do `pip install -U twine` at your earliest convenience, speak up
if you see bugs, and leave a thumbs-up at
https://github.com/pypa/twine/pull/317 if you want to indicate that it
works just fine for you. :)
--
Sumana Harihareswara
Changeset Consulting
https://changeset.nyc

Post by Sumana Harihareswara
(So it turns out I've taken on a volunteer gig, which is that I'm now
one of the Twine maintainers. I may be wrong about how to do this -
please feel free to comment on https://github.com/pypa/twine/pull/314
which is where I'm pulling together a new release checklist for myself.)
https://test.pypi.org/manage/project/twine/release/1.10.0rc1/
This is a release candidate for Twine 1.10.0 which I'm planning to
release early next week.
This release improves project registration usage text (in some cases
removing it where inapplicable), and updates `--repository[-url]` usage
text, prints progress to `stdout` instead of `stderr`, improves the
progressbar, and reorganizes and improves user and developer documentation.
Please see the changelog
https://twine.readthedocs.io/en/latest/changelog.html for detailed notes
under "Next feature release".
pip install --upgrade --pre --index-url https://test.pypi.org/simple/
--extra-index-url https://pypi.org/simple twine
Please check existing open issues at
https://github.com/pypa/twine/issues and open new ones if you have
problems. Thanks!